TECNOCOAT P-2049

TECNOCOAT P-2049

MEMBRANE 100% PURE POLYUREA

The 100% pure polyurea TECNOCOAT P-2049 system was developed as a single coating suitable for waterproofing, protection and sealing in general. The pure polyurea TECNOCOAT P-2049 membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment. TECNOCOAT P-2049 is an aromatic high density and elasticity pure polyurea and excellent mechanical and chemical resistance qualities.

USES

For waterproofing and protection of:

• Sloped roofs, flat roof (walkables), balconies and overhangs.(according ETA 11/0357)
• Floor surfaces and roofs in car parks (traffic deck)with vehicle traffic, non-slip finish (according ENV 12633:2003)
• Tanks and irrigation canals (according the european directive 98/83/CE)
• Coating for bridges (under asphalt), and elements of civil engineering
• Industrial floor surfaces with waterproofing and hard-wearing requirements (according EN 1504.2 certification)
• Retaining walls and foundations (according EN 1504.2 certification)
• Green roofs and walls (Category P4 under EOTA, highly protected roof, according ETA 11/0357)
• Power plants, recycling, water waste and water treatment and storage plants and petrochemical plants (according EN 1504.2)
• Swimming pools, aquariums, lakes. Near sea water
• Vehicle and boat coatings
• Asbestos roofs.
• As a protection for a polyurethane foam (application over TECNOFOAM G-2050)